 # What Are Miners Inches Of Water?

The lower edge of the aperture should be two inches above the bottom of the measuring box, and the plank five inches high above the aperture, thus making a six-inch head above the center of the stream. Each square inch of this opening represents a miners’ inch, which is equal to a flow of 1½ cubic feet per minute.

## How much inches is a mile?

Then, there are 63,360 inches in one mile.

## How many gallons per minute are in a miner’s inch?

A miner’s-inch equals 11.22 gallons per minute, on a 24-hour per day basis.

### How many CFS are in a GPM?

cfs= 448.8325660485*gpm.

### How do I convert CFS to GPM?

Multiply the number of cubic feet per second by 448.83 to convert directly from cubic feet per second to gallons per minute. In the example, check your answer by multiplying 42 by 448.83 to get 18,850.86 gallons per minute.

### How many gallons of water are in an acre foot?

One acre-foot of water equals 325,851 gallons.

### What Is An acre foot of water worth?

An acre foot of water equals about 326,000 gallons, or enough water to cover an acre of land 1-foot deep. To put it another way, an acre foot of water is enough to flood a football field 1-foot deep (a football field is roughly an acre in size).

### How big is an acre visually?

So how big is an acre? One acre is 43,560 square feet, which can appear in any shape. The most common acre is area of one chain by one furlong (66 by 660 feet).

### How much is an acre inch of water?

Acre-inch (ac-in)

One acre-inch is the volume of water necessary to cover an acre 1 inch deep or the amount of water falling on an acre in a 1-inch rain. One acre-inch equals 3,630 cubic feet or 27,154 gallons.

### How do you convert GPM to gallons?

The formula to find GPM is 60 divided by the seconds it takes to fill a one gallon container (60 / seconds = GPM). Example: The one gallon container fills in 5 seconds. 60 / 5 = 12 GPM. (60 divided by 5 equals 12 gallons per minute.)

### Is gpd gallons per day?

GPD is an acronym for gallons per day, while MGD is an acronym for millions of gallons per day.

### How do you convert GPM to KG S?

Conversion chart – gallons US per minute to kilograms (water mass) per second

1. gallon US per minute to kilograms (water mass) per second = 0.063 kg/sec.
2. gallons US per minute to kilograms (water mass) per second = 0.13 kg/sec.
3. gallons US per minute to kilograms (water mass) per second = 0.19 kg/sec.

### How many gallons is 3 feet?

gal (US)↔ft3 1 ft3 = 7.4805194806919 gal (US)

### Is gpm a velocity?

Alternatively, if the flow rate is measured in gallons per minute, the following formula can be used to calculate water velocity. Thus, the velocity v in feet per second is equal to 0.408 times the flow rate Q in gallons per minute divided by the pipe diameter D in inches squared.

### What is a high CFS?

CFS is “cubic feet per second,” a unit of measurement referring to the volume and speed of water flow. … A river, in the Southwest especially, is considered to have high water levels when the CFS is 3,000 and above. Low water levels are around 200/300 CFS.

### How many feet are a mile?

1 mile is equal to 5,280 feet, which is the conversion factor from miles to feet. Go ahead and convert your own value of miles to ft in the converter below. For other conversions in length, use the length conversion tool.

### How many inches represent 5 miles?

You have to convert the inches to miles that are represented on the scale. if 1 in equals 5 miles, then 5 in equals 20 miles. For a line 3.5 inches, it will be 5 miles/inch x 3.5 inches = 17.5 miles.

### How liters are in a gallon?

There are three different sizes of gallons used today. The imperial gallon is 4.54 liters and common in the Commonwealth states and some Caribbean nations. The US gallon is about 3.785 liters and common in the United States and Latin America. The U.S dry gallon is about 4.405 Litres or 1⁄8 US bushel.